Pmc Slots 1 And 2 (Double-Width Pmc); Pci Expansion; Vmebus Interface - Motorola MVME2400 Series Installation And Use Manual

Functional Description

PMC Slots 1 and 2 (Double-Width PMC)

3

PCI Expansion

VMEbus Interface

3-22
PMC slots 1 and 2 with a double-width PMC have the following
characteristics:
Mezzanine Type
Mezzanine Size
PMC Connectors
Signaling Voltage
The PMCspan expansion module connector, J6, is a 114-pin Mictor
connector. It is located near P2 on the primary side of the MVME240x. Its
interrupt lines are routed to the MPIC.
The VMEbus interface is implemented with the CA91C142 Universe
ASIC. The Universe chip interfaces the 32/64-bit PCI local bus to the
VMEbus.
The Universe ASIC provides:
The PCI-bus-to-VMEbus interface
The VMEbus-to-PCI-bus interface
The DMA controller functions of the local VMEbus
The Universe chip includes Universe Control and Status Registers
(UCSRs) for interprocessor communications. It can provide the VMEbus
system controller functions as well. For detailed programming
information, refer to the Universe User's Manual and to the discussions in
the MVME2400 Series VME Processor Module Programmer's Reference
Guide.
PCI Mezzanine Card (PMC)
Double width, standard depth (150 mm x 150 mm)
with front panel
J11 to J14 and J21 to J24 (32/64-bit PCI) with front
and rear I/O
V = 5.0Vdc
io
Computer Group Literature Center Web Site