Table of Contents
Advertisement
Web GUI – AUDIO PROCESSOR – Output
Output – The final screen in this section allows for the adjustment of numerous audio parameters directly on
the final output signal.
Link
Output
Mute
Attenuation (dB)
Mono
Output Delay (ms)
Web GUI – EVENTS – Trigger – Trigger Configuration
EVENTS - In a broadcast facility, there are often requirements to integrate the Digital Audio Processor into
the automation system in order to facilitate functions such as remotely re-calling presets, firing GPO
commands etc. The events tab is where all relevant parameters can be set up.
A Trigger is the logical combination of up to two trigger sources. The Trigger may launch one or more
events. An event runs like a flip-book inside the D*AP. This powerful technology spans from simply recalling a
certain parameter to the complete reconfiguration of the LM 4. But it also enables several fail over scenarios
where the LM 4 will automatically react to the system and/or parameter status
Trigger – As a default, 8 standard trigger conditions are available. These can be configured to determine
actions resulting from combinations of hotkey, GPI, network commands, parameter values, active events,
other active trigger etc. stimulus :
[enable / disable]
[enable / disable]
[on / off]
[-80.0 ... 0.0]
[Stereo, L+R, LL, RR]
[0 ... 2.000]
34
D*AP LM 4
Advertisement
Table of Contents
