Advantech PPC-100 Manual page 72

These drivers are designed to work with Microsoft Word 5.0 and 5.5.
If you have already installed Word on your computer, go to Step 2 to
install the new video driver.
Step 1: Install Word as normal.
Step 2: After you complete the Word installation, place the display
driver diskette into drive A. Make A the default drive by typing A:
<ENTER>. Run the SETUP program by typing SETUP <ENTER>.
Press any key to display a list of supported applications. Use the arrow
keys to select Word and press <ENTER>. Use the arrow keys to select
the desired screen resolution and press <ENTER> (make sure your
monitor is able to display the resolution desired). Press <END> to begin
the driver installation process. A default drive and directory path will be
displayed. Use the backspace key to erase this and type in your Word
directory. After the files have been installed, press any key to return to
the list of supported applications. Press <ESC> followed by Y to exit to
DOS.
Step 3: Copy the driver file for the desired resolution that was just
installed to SCREEN.VID.
Chapter 5 SVGA Setup 67