Advantech PPC-100 Manual page 64

These drivers are designed to work with Microsoft Windows 3.1. You
may install these drivers through Windows or in DOS.
Step 1: Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
Step 2: Place the display driver diskette in drive A. In Windows Program
Manager, choose File from the Options Menu. Then from the pull-down
menu, choose Run . . . . At the command line prompt, type
A:\WINSETUP. Press the <ENTER> key or click OK to begin the
installation. At this point the setup program locates the directory where
Windows is installed. For proper operation, the drivers must be installed
in the Windows subdirectory. Press <ENTER> to complete the installa-
tion. Once completed, the Display Driver Control Panel appears on the
screen. This Control Panel allows you to select and load the installed
drivers.
Another method of installing these drivers is through the File Manager.
Click on Drive A:. Then double-click on WINSETUP.EXE to begin
installation.
To change display drivers in Windows, select the Windows Setup icon
from the Main window. You will be shown the current setup configura-
tion. Select Change System Settings from the Option menu. Click on the
arrow at the end of the Display line. You will be shown a list of display
drivers. Click on the driver you want. Then click on the OK button.
Follow the directions to complete the setup.
After you change display drivers, you may notice that the color scheme
used by Windows looks strange. This is because different drivers have
different default colors. To change the color scheme, select the Control
Panel from the Main window. Select the Color icon. You will be shown
the current color scheme. Choose a new color scheme and click the OK
button.
Chapter 5 SVGA Setup 59