Multi-touch panel computer with intel 4th generation core i processor (51 pages)
Summary of Contents for Advantech PPC-175T
Page 1
User Manual PPC-175T Pentium / Celeron M Processor- Based Panel PC with 17” Color TFT LCD Display Drivers & Manuals for Embedded Computing Platform...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately. PPC-175T series panel PC User's manual Accessories for PPC-175T A power cord is not included with this product, but is available for purchase as a separate option.
Additional Information and Assistance Visit the Advantech web site at mation about the product. Contact the distributor, sales representative, or Advantech's customer service center for technical support and additional assistance. Please have the following information ready before calling: Product name and serial number Description of peripheral attachments Description of software (operating system, version, application software, etc.)
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC- 704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab. PPC-175T User Manual viii...
Page 9
Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power while connecting a jumper or installing a card may damage sensitive electronic components. PPC-175T User Manual...
Dimensions of PPC-175T ... 5 System Setup ...8 A Quick Tour of the Panel PC... 8 Figure 2.1 Front panel of PPC-175T ... 8 Figure 2.2 Left side view of the panel PC ... 8 Figure 2.3 I/O Peripheral Connectors Panel... 9 Figure 2.4...
Chapter 1 Introduction Advantech PPC-175T is an Intel Pentium-M processor based Panel PC with a bright 17” LCD display. The powerful Pentium-M/Celeron-M CPU and Intel 855GME chipset brings the most dynamic applications to life without sacrifices to any industrial reliabil- ity.
LAN: 2nd 10/100 Bases LAN or Giga LAN are optional Capacitive Surface Acoustic Wave (SAW) 1024 x 1024 4096 x 4096 RS-232 Interface (COM4) +5 V @ 100 mA +5 V @ 150 mA Supports both DOS and Windows 225 million 50 million PPC-175T User Manual...
Page 18
Temperature: 0 ~ 45° C (32 ~ 122° F) Relative humidity: 10 ~ 95% @ 40° C (non-condensing) Shock: 10 G peak acceleration (11 msec duration) Power MTBF: >130,000hrs 1.2.0.10 Certifications: EMC: CE, FCC, VCCI, BSMI, 3C BSMI approved Safety: CE, UL, CB. PPC-175T User Manual...
Dimensions 425.14 111.5 Figure 1.1 Dimensions of PPC-175T PPC-175T User Manual...
Page 21
Chapter System Setup This chapter gives system setup information for the PPC-175T Sections include: ! A Quick Tour ! Installation Procedures ! Running the BIOS Setup ! Installing System Software...
Fig. 2-2: HDD Cover CDR/DVD Figure 2.2 Left side view of the panel PC PPC-175T User Manual System Setup Light sensor Figure 2.1 Front panel of PPC-175T PCMCIA Power Hole for Panel mount Speaker...
Both standard VESA standard 75 x 75 / 100 x 100 mm mounting sizes are supported, so that customers may install different accessories for various applications. Figure 2.4 Rear view of the panel PC PPC-175T User Manual VESA mou nt...
CMOS RAM and compares them to the equip- ment check conducted during the power on self-test (POST). If a problem occurs, an error message will be displayed on screen, and the computer prompts the user to run the setup program. PPC-175T User Manual...
These files are a very useful supplement to the information in this manual. Note! The drivers and utilities used for the PPC-175T panel PCs are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers and utilities.
Page 27
Chapter Using the Panel PC This chapter explains onboard devices and peripherial I/O ports available on the PPC-175T Sections include: ! CD-ROM Drive ! PCMCIA ! PS/2 Mouse and Keyboard ! PCI Bus Expansion ! Serial COM Ports ! VGA Port...
CD-ROM drive, I/O ports and the touchscreen. CD-ROM Drive (optional ) It is possible to use the USB external optical device, or order the PPC-175T, which is equipped with slim optical devices. To insert a CD-ROM disc, press the eject button on the CD-ROM drive.
Be sure the panel PC is turned off. Attach the keyboard to the purple colored 5-pin PS/2 port. Attach the PS/2 mouse to the green colored port. Turn on the panel PC. PCMCIA Eject Button PPC-175T User Manual...
Remove the metal plate by unscrewing the single attaching screw. Insert the PCI bus card into the PCI slot of the riser card. (See Fig. 3-3) Run the setup program within the OS to configure the system. PPC-175T User Manual Figure 3.3 PCI bus expansion...
Connect the external device to the system. (See Fig. 3-4.) The USB ports support hot plug-in connection. Install the device driver before using the device. 2nd LAN or Giga-LAN (optional) Mic In PCI Card Slot Line In Line Out 1394 Ports PPC-175T User Manual...
LAN via Advantech OEM processes. 3.11 Front Bezel LED and Light Sensor On the front bezel of the PPC-175T there are three LEDs to indicate Power, HDD, LAN. A light sensor with built-in panel brightness level control completes the array. (See Figure 3.5).
Touchscreen (Optional) The touchscreen is connected to the internal RS-232 port. Its function is similar to that of a mouse. There are 3 kinds of touchscreens that support the PPC-175T: resis- tive, capacitive and SAW type. It is necessary to install the touchscreen driver before it will function. The touch- screen drivers for various operating systems are stored on the CD-ROM disc inside the accessory box.
Page 35
Chapter Hardware Installation This chapter gives instructions for installing hardware devices on the PPC-175T Sections include: ! Jumpers and Connectors ! Disassembling the Panel PC ! Installing the Central Processing Unit (CPU) ! Installing the DDR SDRAM Memory Module...
All procedures are illustrated in Fig. 4-1, 4-2, 4-3 and 4-4. Unscrew the side cover on the plastic HDD cover to expose the HDD module. The Type II CF slot lies underneath the HDD module. Figure 4.1 Unfastening the HDD side cover PPC-175T User Manual Hardware Installation...
Unfasten the screws securing the rear plastic cover and remove it. Figure 4.2 Unfastening the rear cover Before removing the rear cover, disconnect the system fan connector. Figure 4.3 Disconnecting the fan connector PPC-175T User Manual...
(See Fig. 4-5.) Fix the two screws on the metal plate of two side of HDD. Connect IDE cable from main board. Place the HDD on the metal plate, and tighten the four screws from the bottom of the metal plate. Figure 4.5 Fastening the HDD metal frame to the HDD PPC-175T User Manual...
Plug the EIDE cable connector into the HDD. Figure 4.6 Plugging in the EIDE cable Align the metal frame on the HDD to the mounting points and fasten the four screws. Figure 4.7 Aligning the HDD frame PPC-175T User Manual...
Only experienced electronics personnel should open the panel Follow these instructions to install a CPU: Place the CPU carefully into the socket, taking care to align it properly. PPC-175T User Manual Figure 4.8 Placing the CPU in the socket...
Fasten the screw on the CPU socket mounting plate. Figure 4.9 Tightening the screws on the CPU Place the heatsink and fan on top of the CPU, and fasten them with the reten- tion bracket. Figure 4.10 Placing the heatsink and fan on the CPU PPC-175T User Manual...
It is possible to install from 256 MB to 2 GB of DDR SDRAM memory. The panel PC system provides two 184-pin DIMM (Dual Inline Memory Module) sockets and sup- ports 2.5V DDR SDRAM. Figure 4.12 Placing the memory module in the DIMM PPC-175T User Manual...
Page 45
Chapter Jumpers and Connectors This chapter gives information on setting jumpers and using the connectors on the PPC-175T motherboard Sections include: ! Setting Jumpers ! Jumper and Connector Locations ! Connectors...
It also has LED indicator lamps that display the system operation status. The table below lists the function of each jumper and LED. The motherboard of the PPC-175T has a number of jumpers that allow you to config- ure your system to suit your applications.
LVDS voltage setting (JP5) The panel PC supports 5V and 3.3V LVDS voltages. The default voltage is 3.3V (closed pins 1-2). 5V may be selected by closing jumpers 2-3. Table 5.3: LVDS voltage setting (JP5) 3.3V (default) Clear CMOS PPC-175T User Manual...
5.1.2.4 Jumper and Connector Locations CN12 CN16 CN30 CN34 CN37 CN13 CN19 Figure 5.1 Jumpers and connectors on the PPC-175T motherboard PPC-175T User Manual...
Connectors Onboard connectors link the panel PC to external devices such as hard disk drives or floppy drives. The table below lists the function of each of connectors. Table 5.4: PPC-175T connectors table Serial port for touch Serial+VGA port Inverter power...
Page 51
Chapter Driver Installation This chapter gives information on installing drivers for the PPC-175T Sections include: ! Driver Installation ! Updating Drivers...
Before installing the Ethernet driver, note the procedures below. It is necessary to know which operating system is installed on the PPC-175T. Then refer to the corre- sponding installation flow chart. Follow the steps described in the flow chart to com- plete the installation quickly.
Page 53
Chapter Pin Assignments This chapter gives background information on the PPC-175T Sections include: ! MAN-Heading01 style: Arial, Bold, 18pt, MAN-H1 color...
“MAN-Note” table style. Use it just like Caution and Warning tables. Remember to add a TAB at the beginning, then just select all and con- vert: Table/Convert To Table PPC-175T User Manual Pin Assignments Figure 7.1 Test figure Figure 7.2 Another test figure Figure 7.3 A third test figure...
Page 55
Appendix Disassembly This chapter details a complete procedure for dissasembling the Panel PC...
Disassembly Procedure To completely disassemble the panel PC, follow the step-by-step procedures below. Users should be aware that Advantech Co., Ltd. takes no responsibility whatsoever for any problems or damage caused by disassembly of the panel PC by the user.
Unfasten the rear cover and remove it. Figure A.2 Unfastening the rear cover Before removing the rear cover, disconnect the system fan connector. Figure A.3 Disconnecting the fan connector PPC-175T User Manual...
The PPC without the rear cover. Remove the PCI riser card. PPC-175T User Manual Figure A.4 The PPC without the rear cover Figure A.5 Removing the PCI riser card...
Unfasten the middle plate. Figure A.6 Unfastening the middle plate Remove the middle plate. Figure A.7 Removing the middle plate PPC-175T User Manual...
Unfasten the side screws on the HDD module and remove the left side plate. Remove the right side plate and lift out the HDD. PPC-175T User Manual Figure A.8 Unfastening the HDD module Figure A.9 Removing the HDD...
Disconnect the HDD cable from the PPC-175T motherboard. Figure A.10 Disconnecting the HDD cable Loosen the screws on the bracket holding the HDD module. Figure A.11 Loosening the screws on the HDD bracket PPC-175T User Manual...
Loosen the screws on the CD-ROM module. Figure A.12 Loosening the screws on the CD-ROM module Carefully push out the fixed brace holding the CD-ROM. Figure A.13 Pushing out the brace holding the CD-ROM PPC-175T User Manual...
Disconnect the CD-ROM connector. Figure A.18 Disconnecting the CD-ROM connector Unfasten the four screws on the CPU module and remove it. Figure A.19 Removing the CPU module PPC-175T User Manual...
Unsfasten the CPU socket. Unfasten the screw on the CPU socket mounting plate and remove the CPU. PPC-175T User Manual Figure A.20 Unfastening the CPU socket Figure A.21 Removing the CPU...
Appendix B PCI Card Size Limits PCI Cards must be sized within the following dimensional limits: 100.4 106.4 Figure B.1 PCI Card Dimensional Limits PPC-175T User Manual...
Need help?
Do you have a question about the PPC-175T and is the answer not in the manual?
Questions and answers