2.3 Installing Options
Installing a 2.5" HDD
1. Detach the rear panel and remove.
2. Place the HDD in the appropriate location inside the PPC-100, and
tighten the screws.
3. Connect the cable from the HDD to the PC board (CN8).
Warning:(1) Plug the other end of the cable to the
14
PPC-100 User's Manual
HDD, with pin 1 on the cable correspond-
ing to pin 1 on the hard drive. Improper
connection will damage the HDD.
(2) Be careful not to damage the CPU board
with your tools!