Advantech PPC-100 Manual page 55

3. At the prompt, enter the new BIN file which supports your display.
When you are sure that you have entered the file name correctly press
<Enter>.
4. The screen will ask "Do you want to save BIOS?" If you change your
mind or have made a mistake, press N to abort. Press Y if you wish to
save the existing configuration before changing it. Then type the name
under which you want to save the current configuration.
5. The prompt will then ask "Are you sure to program?" Press Y if you
want the new file to be written into the BIOS. Press N to exit the
program.
The new software configuration will then write to the ROM BIOS chip.
This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
50 PPC-100 User's Manual