Toshiba nv Series Instruction Manual page 7

3. Safety Precautions on Daily Use
Do not touch the terminals of
the module and unit during
No touch
energization.
It may cause an electric shock.
Do not modify, repair,
disassemble, or adjust the
Prohibited device, module, or board.
It may cause an electric shock, fire, injury,
or failure.
Upon faulty operation or failure, contact
one of Toshiba's branch offices or service
agencies.
Before using, check that the
power capacity, frequency,
Mandatory
voltage, and regulation comply
with the device specifications.
If not, it may cause damage of the device,
or fire due to overheat, as well as not
obtaining the original performance of the
device.
When performing program
changes during operation,
Mandatory
forced output, run, or halt
operations, ensure safety.
Wrong operations or failure to ensure
safety may cause an accident or damage
to the machine.
Do not forcefully bend, pull, or
twist the power cord and cables.
Prohibited
It may cause breaks or heating.
WARNING
When there is any smoke or
strange odor, turn off the power.
Mandatory
Otherwise, it may cause a fire or electric
shock.
Contact one of Toshiba's branch offices or
service agencies.
When the ambient or internal
temperature of the device rises
Prohibited
abnormally or failure occurs in
the device, do not use the
device.
Using it as it is may cause fire due to
overheat.
Turn off the power, and contact one of
Toshiba's service representatives.
CAUTION
Do not touch the card parts,
contacts, connectors, or
No touch
soldered surface in the module.
Ends of the lead wire of the parts may
cause an injury, or electrostatic breakdown
of the ICs or LSIs may occur, resulting in
failure.
Do not insert any metal into the
gaps of the device main body.
Prohibited
It may cause fire.
Unified Controller nv series type2 SOE Function Instruction Manual
v