Functions And Characteristics Of The Sb812 Module - Toshiba nv Series Instruction Manual

Chapter 1 Introducing the SB812 Module
1.1

Functions and Characteristics of the SB812 Module

The SB812 module is utilized for connection of the intelligent I/O system and F
series I/O system (planned for the future) as the unified controller nv series type 2.
The module supports serial bus transmission of the type 2 main controller unit.
The module also enables the use of the present intelligent I/O system and F series
I/O system (planned for the future).
The followings need to be combined to use the SB812 module.
Firmware
Engineering
tool-related software
OIS-related software
One SB812 module supports two serial buses and allows duplication. Maximum
of two SB812 modules can be connected to the controller module PU821 and the
maximum of four serial buses can be connected. You may connect up to four
modules to the main basic unit (for duplicate configuration). Use twisted pair
■ Characteristics of the SB812 module
2
6F8C1488
HW/SW type
Type2 controller (PU821）：V01.B0 or more
DS connection IF module (FN812）：V01.50 or more
Engineering tool 4 (HET82J4SS) ：V4.10.3 or more
Engineering tool 4（HET82E4SS) ：V4.10.3 or more
Engineering tool 4（HET81J4SS) ：V4.10.3 or more
Engineering tool 4（HET81E4SS) ：V4.10.3 or more
New instrumentation tag editor DS type（GET9TJDSS）：V1.7.2 or more
New instrumentation tag editor DS type (GET9TEDSS）：V1.7.2 or more
OIS service control (SCHISCDD） ：V04.C7 or more
OIS service control (ECHISCDD） ：V04.C7 or more
OIS window（SCHIWDDD）：V04.CA or more
OIS window (ECHIWDDD）：V04.CA or more
・Connectable to the present intelligent I/O module.
The nv controller type 2 can be connected to the intelligent I/O system and
serial bus cable utilized in MCS1000, MCS1200, TOSDIC-CIE DS and
integrated controller V series.
・Easy to update the present system
You can quickly update to the latest nv series type controller just by
replacing the main basic unit.
Combination