Steps
1. On the main page of the ZXHN H268A, select Management & Diagnosis > Login
Timeout to open the Login Timeout page, as shown in
Figure 7-3 Login Timeout
2. Specify the time in the Timeout text box.
3. Click Apply button to apply the changes.
The timeout configuration takes effect after you re-log in to open the system.
– End of Steps –
7.3 System Management
7.3.1 Configure the Device Management
This procedure introduces how to reboot the device or restore the factory default settings.
Steps
1. On the main page of the ZXHN H268A, select Management & Diagnosis > System
Management > Device Management to open the Device Management page, as
shown in
SJ-20150916162339-007|2017-02-16 (R1.0)
Note:
Figure
7-4.
Chapter 7 Management&Diagnosis
7-3
ZTE Proprietary and Confidential
Figure
7-3.