Zte H268A Quick Start Manual

Ethernet

Hide thumbs Also See for H268A:

Download this manual

Step 1

Connect your nbn™ equipment and modem using the setup guide provided for your technology type.

If you have not completed this, please refer back to the nbn™set up guides.

Step 2

Ensure the modem is powered on. Using a pin, reset the modem by pressing and holding the reset

button on the modem until all the lights go off.

Step 3

Using your own device (computer, laptop, tablet or smartphone), connect to the modem using one of

the two options shown below: Ethernet cable directly to the Ethernet port or WiFi.

Ethernet

Connect the Ethernet cable (this is usually yellow, blue, grey or white) as shown below from the

Ethernet port (LAN port) on the modem to the Ethernet port on your computer or laptop.

WiFi

Using the wireless security card from your modem, connect to the wireless (WiFi) network

using the security code shown.

ZTE H268A - Ethernet

Page 1 ZTE H268A - Ethernet Step 1 Connect your nbn™ equipment and modem using the setup guide provided for your technology type. If you have not completed this, please refer back to the nbn™set up guides. Step 2 Ensure the modem is powered on. Using a pin, reset the modem by pressing and holding the reset button on the modem until all the lights go off.
Page 2 Step 4 Open a web browser - E.g. Google Chrome, Firefox, Internet Explorer. Enter the following into the URL address bar: 192.168.20.1 You may see a login page and if the details are not already prefilled, use the below default settings: Default username: admin Default password: admin Step 5...
Page 3 Step 7 You can adjust the Wi-Fi as you wish by clicking Local network → WLAN → WLAN Basic (Will open WLAN configuration page) → click apply once completed. Step 8 If you have a VoIP service, please contact us (contact details are listed below). Step 9 We recommend changing your default password to avoid any potential security breaches.