Figure 6-6 Sip Protocol Page - Zte ZXHN H268A Maintenance Management Manual

Figure 6-6 SIP Protocol Page

2. Set the parameters. For a description of the parameters, refer to
Table 6-4 Parameter Descriptions for the SIP Protocol
Parameter
Local Port
Primary Proxy Server
Primary Outbound Proxy
Server
Primary Proxy Port
Secondary Proxy Server
Secondary Outbound
Proxy Server
Secondary Proxy Port
Register Expires
Unregister On Reboot
Enable Link Test
Link Test Interval
SJ-20150916162339-007|2017-02-16 (R1.0)
Description
Local port that the SIP protocol uses, default: 5060.
IP address of the active SIP proxy server that the ISP provides, which
must be the same as that configured on the SIP server.
IP address of the active outbound proxy server that the ISP provides,
which must be the same as that configured on the SIP server.
Port number that the ISP provides for communication between the
active server and VoIP terminals, which must be the same as that
configured on the SIP server, default: 5060.
IP address of the standby SIP proxy server that the ISP provides,
which must be the same as that configured on the SIP server.
IP address of the standby outbound proxy server that the ISP
provides, which must be the same as that configured on the SIP
server.
Port number that the ISP provides for communication between the
standby server and VoIP terminals, which must be the same as that
configured on the SIP server, default: 5060.
Registered lifecycle, unit: seconds, default: 3600.
Whether to deregister VoIP terminals after the server is restarted.
Whether to enable link tests.
Interval of link tests, default: 20 seconds.
6-5
Chapter 6 Configure the VoIP
Table 6-4.
ZTE Proprietary and Confidential