Figure 5-4 Wlan Global Configurations - Zte ZXHN H268A Maintenance Management Manual

Figure 5-4 WLAN Global Configurations

4. Configure the WLAN global configuration parameters.
Table 5-2
Table 5-2 WLAN Global Configuration parameters
Parameter
Channel
Mode
Band Width
SGI
Beacon Interval
Transmitting Power
SJ-20150916162339-007|2017-02-16 (R1.0)
lists the WLAN global configuration parameters.
Chapter 5 Configure the Local Network
Description
The default is Auto.
l
2.4GHz: Auto,1 - 13.
l
5GHz: Auto,36,40,44,48,52,56,60,64,100,104,108,11
2，149,153,157,161.
Select the wireless RF transmission mode.
2.4GHz:
l
IEEE802.11b only
l
IEEE802.11g only
l
IEEE802.11n only
l Mixed(802.11b/g)
l Mixed(802.11g/n)
l Mixed(802.11b/g/n)
5GHz:
l
IEEE802.11a only
l
IEEE802.11n only
l
Mixed(802.11a/n)
l
Mixed(802.11a/n/ac)
2.4GHz: Auto,20Mhz, 40Mhz. The default is 20 Mhz.
5GHz: 20Mhz, 40Mhz, 80Mhz. The default is 80 Mhz.
Enable this option to increase the traffic flow.
Time interval for the wireless device to broadcast the SSID
information. Keep the default value.
Select the transmitting power as required.
5-3
ZTE Proprietary and Confidential