Figure 5-20 Routing Table; Figure 5-21 Static Routing - Zte ZXHN H268A Maintenance Management Manual

1. On the main page of the ZXHN H268A, select Local Network > Routing > IPv6 to
open the Routing Table page, as shown in

Figure 5-20 Routing Table

2. Click Refresh to refresh the informations.
Static Routing
3. ClickStatic Routing to open the Static Routing page, as shown in

Figure 5-21 Static Routing

4. Configure the static routing parameters.
Table 5-11
Table 5-11 Static Routing parameters
Parameter
Name
WAN Connection
Prefix
Gateway
SJ-20150916162339-007|2017-02-16 (R1.0)
lists the static routing parameters.
Description
The name of static routing entry.
WAN connection for static routing
The prefix is consistent with the network segment of the IPv6 interface.
If prefix is ::/0, this configuration will be a default routing, which is
effective for any destination address.
Gateway of the network segment which the network interface belongs
to.
5-15
Chapter 5 Configure the Local Network
Figure 5-20.
ZTE Proprietary and Confidential
Figure 5-21.