Steps
1. Select VoIP > Fax. The Fax page is displayed, as shown in
Figure 6-8 Fax Page
2. Set the parameters. For a description of the parameters, refer to
Table 6-6 Parameter Descriptions for the Fax
Parameter
Enable T38 Protocol
3. Click Apply.
– End of Steps –
SJ-20150916162339-007|2017-02-16 (R1.0)
Description
Whether to enable the T38 protocol.
If this check box is not selected, the T30 protocol is used.
6-7
Chapter 6 Configure the VoIP
Figure
6-8.
Table
6-6.
ZTE Proprietary and Confidential