Displaying Ipv4 Routing Table; Routing (Ipv6); Configuring Ipv6 Default Gateway - Zte ZXHN H108N Maintenance Management Manual

2. Select an interface from the Destination Interface drop-down list, and specify the routing policy
as required.
3. Click Add.
The policy routing rule is configured. The packets will be forwarded based on the policy routing.

6.4.4 Displaying IPv4 Routing Table

This procedure introduces how to display the routing table.
Prerequisite
The routing tables have been created.
Steps
1. On the navigation tree, click [Network→Routing(IPv4)→ Routing Table] to display the routing
table, which displays the routing information, see
Figure 30 Routing Table

6.5 Routing (IPv6)

This section includes the following:


Configuring IPv6 Default Gateway

 Configuring IPv6 Static Routing
 Configuring IPv6 Policy Routing
 Displaying IPv6 Routing Table
6.5.1 Configuring IPv6 Default Gateway
This procedure introduces how to configure one WAN connection as the IPv6 default gateway. All
the user-side devices will access the Internet by using this WAN connection by default.
Figure 30.
48