Citroen C4 Picasso
Preliminary Work
Vehicle
• Open the fuel tank cap.
• Ventilate the fuel tank.
• Close the fuel tank cap again.
• Depressurise the cooling system.
• Disconnect and completely remove the battery with carrier.
• Remove the air filter together with the intake hose.
• Remove the bracket of the air filter (original vehicle bolts will be reused).
• Remove the coolant reservoir cap.
• Remove the lower and left instrument panel trim on the driver's side.
• Remove the glove compartment.
• Remove lower trim on front passenger side
• Remove the underride protection.
Heater
• Remove years that do not apply from the type and duplicate label.
• Attach the duplicate label (type label) in the appropriate place in the engine compartment.
1
Ident. No.: 1317386B_EN
Heater Installation Location
1 Heater
1
Status: 10.12.2012
Installation
location
© Webasto Thermo & Comfort SE
5