Advertisement
Reference Code
Description/Action Perform all actions before exchanging Failing Items
0224
Device detected wrong start command from WS IOP
0225
WS IOP detected wrong exception response from device
0226, 0230 to 0239,
Printer detected equipment error
0240 to 0248
0249
WS IOP detected wrong request or response from device
026X, 027X, 028X
Printer detected equipment error
See printer documentation for more information.
0290
WS IOP detected no status change from device
0291
WS IOP detected busy time-out from device
02A0 to 02AF,
Printer detected equipment error
02FF
Consult the printer's manual for additional information.
A000
Too many devices active on the workstation IOP
This error occurs if you attempted to activate more workstations than
allowed.
Switch off power to (or remove) one or more of the display stations (except
for the console) that are attached to this workstation I/O processor.
Perform an initial program load (IPL) from the control panel to correct the
problem.
Refer to the local workstation diagrams for the location of workstations if
necessary.
B000
WS IOP fails to report part, model and serial number
Perform TWSC-PIP1.
C000
WS IOP error not known
D000
Work Station IOA start-up test error
D010
WS IOP storage failure corrected
Perform TWSC-PIP1.
D011
WS IOP card storage failure
D021
WS IOP detected errors on all cables
D022
WS IOP parity errors detected on all cables
D023
WS IOP detected errors on some, but not all cables
Perform TWSC-PIP1.
B070
Failing Item
FI00604
AJLYD01
FI00610
FI00604
FI00610
FI00604
FI00604
FI00610
FI00604
FI00604
FI00610
FI00604
FI00610
FI00604
GAUBBBB
FI00610
AJLYD01
FI00610
FI00610
FI00610
FI00610
FI00602
FI00601
FI00610
FI00615
FI00602
FI00601
FI00610
FI00615
FI00602
FI00601
FI00610
219
System Reference Codes
Advertisement
