Download Print this page

IBM iSeries Series Analyze Hardware Problems (System Reference Codes page 135

Hide thumbs Also See for iSeries Series:

Advertisement

Reference Code
Description/Action Perform all actions before exchanging Failing Items
9117
SPCN - Control Panel interface is now working.
The SPCN to control panel interface is now working.
No action required. This reference code is logged for information only.
91DD
All SPCN Downloads Complete
9212
Frame Address field not valid.
A Licensed Internal Code command had a frame address that is not valid.
Exchange the failing items for the failing node.
9213
Invalid Address status, secondary node.
The address in the SPCN command does not match the assigned address of
the secondary node.
Exchange the failing items for the failing node.
9214
Invalid Address Mode status
Invalid Address Mode occurred during Frame Command processing.
9215
Invalid Frame Command status
Invalid Frame Command occurred during Frame Command processing.
921B
System Unit SPCN Port Fault status.
System Unit Port Fault occurred during Command processing.
922B
Address Unassigned status
A secondary node has no address assigned during Command processing.
9231
Frame-to-Frame Communications Failure
A frame-to-frame communications failure occurred during STF processing.
9232
Intrarack Communications Failure
An SPCN secondary node to frame communications failure occurred
during Command processing.
9233
Intrarack Communications Failure
An SPCN frame to secondary node communications failure occurred
during Command processing.
9234
Unsupported Packet Size status
Unsupported Packet Size occurred during STF and Secondary Node
Command processing.
9235
SPCN Secondary Node Timeout status
An SPCN Secondary Node Timeout occurred during Command processing.
If the failing secondary node is in a 9337, go to the "Analyzing Problems"
section in the 9337 Disk Array Service Information manual.
9236
Frame Timeout status
An SPCN Frame Node Timeout occurred during Network post processing.
9238
Secondary Node Fault
An SPCN Secondary Node Fault occurred during Command processing.
1xxx
Failing Item
TWRCARD
TWRCARD
TWRCARD
AJDG301
TWRCARD
AJDG301
TWRCARD
AJDG301
TWRCARD
AJDG301
TWRCARD
CBLALL
TWRCARD
CBLALL
TWRCARD
CBLALL
TWRCARD
CTLPNL
SVCPROC
TWRCARD
AJDG301
CBLALL
TWRCARD
CBLALL
TWRCARD
AJDG301
131
System Reference Codes

Advertisement

loading