Download Print this page

IBM iSeries Series Analyze Hardware Problems (System Reference Codes page 192

Hide thumbs Also See for iSeries Series:

Advertisement

7208
Reference Code
Description/Action Perform all actions before exchanging Failing Items
3005
Blank tape or BOT encountered
The tape drive has found a blank tape or BOT.
When using a new data cartridge, the tape must first be initialized.
This error can also occur when reading a tape if that tape was removed
from the tape drive before writing was complete.
Also see the Action for reference code 030B.
3010
Illegal or unsupported tape unit response
The tape drive returned a response to the IOP that is illegal or is not given
support.
Perform the following:
1. TU-PIP1.
2. TU-PIP3 in TPUNIT
3100
Interface error detected by I/O processor or by tape unit
The IOP or the device detected a permanent error on the interface to the
system.
Perform the following:
1. TU-PIP1.
2. TU-PIP3.
3110
Tape unit command timeout
The tape drive did not complete a command sent by the IOP in the time
allowed.
Perform the following:
1. TU-PIP1.
2. TU-PIP2 in TPUNIT
4016 to 4017
Licensed Internal Code for the tape unit is not correct
9020
I/O processor detected a SCSI bus configuration error
Before exchanging any parts, verify that the following conditions are not
present:
v Tape and DASD devices attached to an I/O Processor that does not
support attachment of both tape and DASD devices at the same time.
v A device type or model that is not given support.
9100
Interface error detected by I/O processor or by tape unit
Before exchanging any parts, do the following:
1. Ensure that the device is powered on.
2. Ensure that the SCSI cable between the device and the I/O Processor or
I/O Adaptor is seated correctly, and that there are no bent or damaged
pins on the SCSI cable.
3. Ensure that a terminating plug is attached to the device.
188
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
ML2TMED
46G2227
AJEDA00
46G2227
AJEDA00
46G2227
FI00141
FI00830
46G2599
42F7300
17G1500
46G3934
AJEDA00
46G2227
FI00141
FI00830
46G2599
42F7300
17G1500
46G3934
AJEDA00
AJEDA00
UL2CNFG
46G2227
FI00130
46G2227
FI00131
46G3934
FI00830
46G2599
17G1500

Advertisement

loading