Advertisement
3590
Reference Code
Description/Action Perform all actions before exchanging Failing Items
9211
Gateway device detected a bus protocol error
Use the gateway device service documentation to analyze the problem.
9300
Tape unit failure
9301
Tape device failure, redundancy lost
The tape unit detected a hardware failure that does not prevent the tape
unit from completing the present operation.
See the 3590 Tape Unit service information to determine the failing item.
9302
I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O processor data. For
more information, see the iSeries Service Functions information or ask your
next level of support for assistance.
9303
Gateway device failure
Use the gateway device service documenation to analyze the problem.
9310
Licensed Internal Code for the tape unit is not correct
9320
Tape device Licensed Internal Code failure
Do the following:
1. Take a dump of the tape device Licensed Internal Code (see the 3590
Tape Unit service information).
2. Power off the tape unit. Then power on the tape unit to resume
operation.
9321
Gateway device Licensed Internal Code error
Use the gateway device service documenation to analyze the problem.
9350
Tape unit detected a read or write error on tape medium
A permanent read or write error occurred, and the tape unit determined
that the tape cartridge is defective. Exchange the tape cartridge.
9351
Tape with excessive error rate was mounted in tape device.
The tape unit detected that the installed tape cartridge has a history of
excessive read and write errors. It is recommended that you exchange the
tape cartridge.
9355
The data format is incorrect; the tape cannot be read
The tape device does not give support to the data format on the tape
cartridge. Format the tape cartridge again or use a different tape cartridge.
See the 3590 Tape Drive Operator's Guide for instructions on formatting a
tape cartridge.
9500
I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O processor data. For
more information, see the iSeries Service Functions information or ask your
next level of support for assistance.
170
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
FCGATE
FCIOA
FI00851
ANYFC
FCCABLE
EXTSCSI
61G8324
FI00851
FI00851
FI00130
FCGATE
FI00851
FI00130
FI00130
FI00851
FCCODE
MHQTMED
UHQCLN
FI00851
MHQTMED
UHQCLN
FI00851
MHQTMED
UHQCLN
FI00851
FI00130
Advertisement
