Download Print this page

IBM iSeries Series Analyze Hardware Problems (System Reference Codes page 150

Hide thumbs Also See for iSeries Series:

Advertisement

2749, 2767, 2768, 2842, 2843, 2844, 284B, 284C, 284D, 284E, 286C, 286D, 286E, 286F, 5702
Reference Code
Description/Action Perform all actions before exchanging Failing Items
0A17
A permanent I/O processor failure occurred
0A22
I/O processor detected a storage transfer error
102E
Out of alternate sectors for disk storage
1307
I/O processor resource not available
1310
I/O processor resource not available
The I/O processor error log is being filled faster than the errors are being
reported to the system. Check other errors reported to the system and
correct them.
1317
I/O processor card error
Display the Service Action Log entry for this SRC. If the Failing Item
indicates IOP, then replace the IOP. If the Failing Item indicates SVCDOCS,
then do NOT replace the IOP. This is a recoverable error. Perform the
following:
1. If the I/O Processor is not operable and disk units are attached, use
Hardware Service Manager to re-IPL the IOP. Other resources attached to
the IOP may then need to be Varied On.
2. If disk units are not attached, perform the VRYCFG RESET(*YES)
command to reset the IOP and Vary On attached resources.
2200
I/O processor Licensed Internal Code error
2201
Removable media error during IPL
2202
Removable media error during IPL
3000
A permanent I/O processor failure occurred
3001
Not valid condition in I/O Processor Licensed Internal Code
The Licensed Internal Code found a condition that should not have
occurred.
3002
Addressed device failed to respond to selection
Perform SDIOP-PIP16.
3006
System bus error
3020
I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 0. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
146
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
IOP
MA_BRDG
AJDGP01
AJDG301
AJDGP01
AJDG301
IOP
MA_BRDG
FI01105
AJDGP01
AJDG301
SVCDOCS
AJDGP01
USER
FI01105
FI00022
FI01105
FI01101
IOP
MA_BRDG
IOP
AJDGP01
FI01105
STORIOA
FI01140
FI01141
FI01106
IOP
ANYBUS
FI01101
USER
FI01107
STORIOA

Advertisement

loading