E9: Protection And Error Parameters - REXROTH VFC 3610 Quick Start Manual

66/91
Start-up

E9: Protection and error parameters

Code
E9.00 Automatic error reset attempts
E9.01 Automatic error reset interval
Automatic error reset attempts re-
E9.02
start time
E9.05 Last error type
E9.06 Second last error type
E9.07 Third last error type
E9.10 Output frequency at last error
E9.11 Setting frequency at last error
E9.12 Output current at last error
E9.13 Output voltage at last error
E9.14 DC-bus voltage at last error
Power module temperature at last
E9.15
error
E9.50 Last warning type
E9.51 Second last warning type
E9.52 Third last warning type
E9.97 Last error detail
E9.98 Second last error detail
E9.99 Third last error detail
Value range of E9.05...E9.07:
0: No error
1: OC-1, overcurrent at constant speed
2: OC-2, overcurrent during acceleration
3: OC-3, overcurrent during deceleration
4: OE-1, overvoltage at constant speed
5: OE-2, overvoltage during acceleration
6: OE-3, overvoltage during deceleration
8: UE-1, undervoltage during run
9: SC, surge current or short circuit
10: IPH.L, input phase loss
11: OPH.L, output phase loss
12: ESS-, soft start error
20: OL -1, converter overload
Bosch Rexroth AG R912005518_Edition 16
Name
0...3 (0: Inactive)
0.1...60.0 s
0...65,535
–
–
–
–
–
–
–
–
–
–
–
–
00000...FFFFF
00000...FFFFF
00000...FFFFF
Rexroth Frequency Converter VFC
Setting range Default
10.0
3610 / VFC 5610
Min. Attri.
0 – Stop
0.1 Stop
0 1 Stop
– – Read
– – Read
– – Read
– 0.01 Read
– 0.01 Read
– 0.1 Read
– 1 Read
– 1 Read
– 1 Read
0 – Read
0 – Read
0 – Read
0 – Read
0 – Read
0 – Read