Parameter List; Terminology And Abbreviation In Parameter List - REXROTH VFC 3610 Quick Start Manual

Rexroth Frequency Converter VFC
3610 / VFC 5610

3.4 Parameter List

3.4.1 Terminology and Abbreviation in Parameter List

Code: Function / parameter code, written in bx.xx, Cx.xx, Ex.xx, Fx.xx, Hx.xx,
●
Ux.xx, dx.xx
Name: Parameter name
●
Default: Factory default
●
Min.: Minimum setting step
●
Attri.: Parameter attribute
●
– Run: Parameter setting can be modified when the converter is in run or
stop status.
– Stop: Parameter setting can only be modified when the converter is in stop
status.
– Read: Parameter setting is read-only and cannot be modified.
DOM: Depends on model
●
[bx.xx], [Cx.xx], [Ex.xx], [Fx.xx], [Hx.xx], [Ux.xx], [dx.xx]: Function / parame-
●
ter values
R912005518_Edition 16 Bosch Rexroth AG
39/91
Start-up