Lan Command Speed - TDK-Lambda GENESYS Series User Manual

2.3. LAN Command Speed

The following communication speeds are typical values only. In addition to the variability in
the Genesys™ LAN interface, there are timing variations within the controller and the
network routing.
The following speed specifications are subject to change without notice.
Testing was done using a single-client TCP socket application with the power supply set for
a static IP address.
Typical Command or query speeds:
Most Commands and Queries
This includes the commands not listed below:
VOLT n.nn
MEAS:VOLT?
OUTP:STAT 1
VOLT:LIM:LOW n.nn
SOUR:MOD?
System Queries
Examples:
SYST:ERR?
*ESR?
Status Register Queries
Examples include:
STAT:QUES:COND?
STAT:OPER:COND?
Instrument Select for Multi-drop
Example:
INST:SEL nn
Identity Query
Example:
*IDN?
Operation Complete
Example:
*OPC?
8303460000 Rev A
90% of
Commands
in less than:
VOLT?
OUTP:STAT?
VOLT:LIM:LOW?
8
100% of
Commands
in less than:
55 mSec 85 mSec
10 mSec 15 mSec
35 mSec 60 mSec
260 mSec 410 mSec
125 mSec 135 mSec
3 mSec 4 mSec
IA672-04-01-Rev. I