Pioneer SPH-20DAB - Smartphone Receiver Quick Start Guide

Also See for SPH-20DAB:

Operation manual (35 pages)

Installation manual (29 pages)

Table of Contents

Contents

1 Before You Start
2 Basic operation
3 Operating the smartphone holder
4 Bluetooth connection
5 Making a connection with Pioneer Smart Sync
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Pioneer SPH-20DAB - Smartphone Receiver Quick Start Guide

Before You Start

This guide is intended to guide you through the basic functions of this unit.
For details, please refer to the Operation Manual stored on the website. https://www.pioneer-car.eu/eur/

To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as papers, floor mat, cloths).

Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
Always keep the volume low enough to hear outside sounds.
The Pioneer CarStereo-Pass is for use only in Germany.
This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.

If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.

Basic operation

SPH-20DAB
Basic operation

Operating the smartphone holder

Detach the smartphone from the holder while driving under bad road conditions since the smartphone may fall from the holder.
Do not leave the smartphone attached onto the holder.
Do not use the holder if you experience difficulty when attaching the smartphone onto the holder.
Do not operate the holder or smartphone while driving.
Be careful not to get your hands and fingers caught in the moving parts while operating the holder.
Do not attach the smartphone to the holder in a location where it may drop on the driver's feet.
Do not set the holder near the air conditioner vent.
Make sure that nothing affects the operation of the air bags or vehicle operating systems, safety feature or hazard lamps.
PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR ANY DAMAGES CAUSED THROUGH USE OF THE PRODUCT OR VEHICLE.

Removing the smartphone holder

Detach the front panel.
Pull out the holder by holding the anti slip portion on the edge of the holder until the holder is completely visible.

Never pull up the holder until the holder is completely visible.
Pull up the holder vertically.

Make sure that the line can be seen when the holder is pulled up vertically.
Attach the front panel to the unit.

Attaching the smartphone to the holder

Depending on the shape of the smartphone, smartphone case or cover, it may not be attachable to the holder.
Be careful not to pinch your fingers in the holder.

Compatible smartphone size
H: 58 mm - 170 mm
W: 58 mm - 87 mm
D: 4 mm - 10 mm
Weight: under 0.25 kg

Hook the smartphone on the upper arm and then push it into the lower arm.
Slide the lower arms position to avoid hitting the lower arm and smartphone buttons against each other.

NOTES

Make sure that the smartphone is held properly on the holder.
When the smartphone buttons come in contact with the upper or lower arms, adjust the smartphone's position or turn the smartphone upside down.

Bluetooth connection

Up to two Bluetooth telephones can be connected simultaneously.

Turn on the Bluetooth function of the device.
Select the unit name shown in the device display.
Make sure the same 6-digit number appears on this unit and the device.
Select [Y].

Making a connection with Pioneer Smart Sync

Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle.

For details on what operations are available on the application, see the application's help section.

Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
Functions operated with a smartphone are merely tools available to the driver. The driver shall observe safe and sensible driving behaviour under all circumstances.

Connect this unit with the mobile device via Bluetooth (refer to "Bluetooth connection").
Pioneer Smart Sync on the iPhone/Android device starts automatically.

Pioneer Smart Sync connection via wired connection
You can also make the Pioneer Smart Sync connection via USB connection.

Press and hold to display the main menu.
Press to select [SYSTEM], then press to confirm.
Press to select [APP CTL], then press to confirm.
Press to select [WIRED], then press to confirm.
Pioneer Smart Sync on the iPhone/Android device starts automatically.

NOTE
The automatic connection may fail depending on your mobile device. In that case, press and hold .

TIP
Once the Pioneer Smart Sync connection is made between the unit and the mobile device, you can pair from the application on the mobile device from the next time.