Paper Tray Unit Removal - Ricoh SP5 Series Service Manual

PAPER FEED June 30, 1998
6.8 PAPER FEED

6.8.1 PAPER TRAY UNIT REMOVAL

[D]
[E]
[F]
[E]
[A]
[E]
[C]
A229R592.WMF
[B]
[G]
A229R593.WMF
To facilitate transportation, the upper part of the copier (copier main frame) [A] and
the lower part of the copier (paper tray unit) [B] can be separated as follows:
1. Turn off the main switch.
2. Remove the document feeder (2 screws, 1 connector)
3. Remove the front cover [C]. (Refer to Front Cover Removal.)
4. Remove the rear covers [D].
5. Remove the four screws [E].
6. Remove the air tube [F].
7. Disconnect the nine connectors [G].
8. Remove the copier main frame [A] from the paper tray unit [B].
NOTE: When re-installing the copier main frame on the paper tray unit, do not
pinch the cable between the copier main frame and the paper feed unit.
6-60