Table of Contents
Advertisement
June 30, 1998
4.2.3 TEST PATTERN PRINTING (SP2-902)
NOTE: Do not operate the machine until the test pattern is printed out completely.
Otherwise, an SC may occur.
1. Access the SP mode which contains the test pattern you need.
2. Touch the "Copy Mode" key on the operation panel to access the copy mode
display.
3. Select the paper size.
4. Press the "Start" key to print the test pattern.
5. After checking the test pattern, exit copy mode by touching the "SP Mode" key.
6. Exit the SP mode.
Test Pattern Table (SP2-902-2: Test Pattern Printing – IPU)
No.
Test Pattern
0
None
1
Grayscale 1
2
Grayscale 2
3
Grayscale 3
4
Grayscale 4
5
Grayscale 5
6
Vertical Lines (256-greyscale)
Test Pattern Table (SP2-902-3: Test Pattern Printing – Printing)
No.
Test Pattern
0
None
1
Vertical Line (1-dot)
2
Horizontal Line (1-dot)
3
Vertical Line (2 dot)
4
Horizontal Line (2-dot)
5
Grid Pattern (Single-dot)
6
Grid Pattern (Double-dot)
7
Alternating Dot Pattern
8
Full Dot Pattern
9
Black Band
10
Trimming Area
SERVICE PROGRAM MODE
No.
7
Vertical Lines (1-dot)
8
Vertical Lines (2-dot)
9
Hatch Pattern
10
Cross Pattern
11
Slant Pattern
12
Cross Stitch (400 dpi)
13
Cross Stitch (600 dpi)
No.
11
Argyle Pattern
12
16 Grayscales (Horizontal)
13
16 Grayscales (Vertical)
14
16 Grayscales (Vert./Hor.)
15
16 Grayscales (Vert./Hor Overlay)
16
Not used
17
Horizontal Line (1-dot)
18
Grid Pattern (Single-dot)
19
Grid Pattern (Double-dot)
20
Alternating Dot Pattern
21
Blank Page
4-51
Test Pattern
Teat Pattern
Advertisement
Table of Contents
