Table of Contents
Advertisement
June 30, 1998
Mode No.
(Class 1 , 2 & & & & 3)
4-909
IPU Setting - 2
20
Image Data
Path - Printing
4-910
Data Compression
1
Data
Compression
2
Data
Compression
Threshold
3
ABS Core
4-911
HDD
1
HDD Media
Check
HDD
2
Formatting
6
HDD Bad
Sector
Information
Reset
7
HDD Bad
Sector Display
8
HDD Model
Name Display
Function
Selects one of the following video data outputs, which will be
used for printing.
0: After image processing
1: After MSU
2: From application
3: Normal operation
Do not change the value.
Designer use only
Do not change the value.
Designer use only
Do not change the value.
Designer use only
Do not change the value.
Checks for bad sectors on the hard disk that
develop during machine use. This takes 4
minutes.
This SP mode should be done when an
abnormal image is printed. There is no need
to do this at installation as the hard disk
firmware already contains bad sector
information, and damage is not likely during
transportation.
Bad sectors detected with this SP mode will
be stored in the NVRAM with the bad sector
data copied across from the firmware.
If the machine detects over 50 bad sectors,
SC361 will be generated. At this time, use
SP4-911-2.
Formats the hard disk. This takes 4
minutes.
Do not turn off the main power switch
during this process.
Resets the bad sector information which is
stored in the NVRAM.
This SP should be used when the hard disk
is replaced.
* Displays the number of bad sectors there
are on the hard disk.
If the machine detects a total of over 50 bad
sectors on the disk, SC361 will be
generated. At this time, use SP4-911-2.
Displays the model name of the HDD.
If the HDD is not installed or the HDD
connector is not connected, SC360 will be
displayed. However, the user can make
single copies.
4-31
SERVICE PROGRAM MODE
Settings
0: ON
1: OFF
0 ~ 255
1/step
8
0: ON
1: OFF
Start
Start
Total: 0
Copy: 0
Printer: 0
Copy Server:
0
Advertisement
Table of Contents
