By-Pass Feed Roller Replacement - Ricoh SP5 Series Service Manual

PAPER FEED

6.8.10 BY-PASS FEED ROLLER REPLACEMENT

[C]
1. Open the by-pass feed table, then remove the cover [A] (3 screws).
2. Replace the pick-up roller [B] (1 snap ring) and the feed roller [C] (1 snap ring).
NOTE: The paper feed (pick-up, feed, separation) rollers used in the by-pass
feed table and LCT are different from the paper feed rollers used in the
1st ~ 3rd feed units in the paper tray unit. They are not
interchangeable.
3. Remove the feed unit cover. (Refer to Right Cover Removal.)
4. Replace the separation roller [D] (1 snap ring).
[B]
A229R611.WMF
6-74
June 30, 1998
[A]
A229R613.WMF
[D]