Program Download - Ricoh SP5 Series Service Manual

June 30, 1998

4.3 PROGRAM DOWNLOAD

In this machine, the SBICU software is upgraded using a flash memory card.
There are two program download procedures. One downloads from the flash
memory card to the SBICU. The other downloads from the SBICU to a flash
memory card.
NOTE: The procedure for how to write the source software from a flash memory
card writer to a flash memory card is described in the SwapBox FTL
manual.
Downloading to the SBICU
1. Turn off the main power switch.
2. Remove the flash memory card cover [A].
3. Plug the flash memory card [B] into the card slot.
NOTE: Make sure that the surface printed "A" faces upwards.
4. Turn on the main power switch.
A229R120.WMF
A229M507.TIF
4-61
PROGRAM DOWNLOAD
[B]
[A]