Loading Paper Into The A3/11 × 17 Tray Unit - Ricoh Pro C5110 Series Manual

Hide thumbs Also See for Pro C5110 Series:
Table of Contents

Advertisement

8. Adding Paper and Toner
Loading Paper into the A3/11 × 17 Tray Unit
(mainly Europe and Asia)
A3/11 × 17 tray unit can hold A3
1
8
/
× 14 , or 8
2
(mainly North America)
A3/11 × 17 tray unit can hold 11 × 17
1
8
/
× 14 , or 8
2
• Check the paper edges are aligned at the right side.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2.
Square the paper and load it print side down.
Do not stack paper over the limit mark.
3.
Carefully push the paper tray fully in.
108
paper only. If you want to print on A4
1
/
× 11
, contact your service representative.
2
paper only. If you want to print on A3 , A4
1
/
× 11
, contact your service representative.
2
CVA004
CVA005
, B4 JIS , 11 × 17 ,
, B4 JIS ,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro c5100 seriesPro

Table of Contents