Ricoh SP5 Series Service Manual page 212

June 30, 1998
Mode No.
(Class 1 , 2 & & & & 3)
2-962 Auto Process Control
2-963 Toner Supply From Toner Bottle
2-964 Blade Protection
1 Pattern
Interval
2 Pattern
Density
2-965 Toner Pump Adjustment
1 First Toner
Waste
Adjustment
2 After First
Toner Waste
3 Pump Clutch
On Time
4 Pump Motor
On Time
5 Return to First
Toner Waste
Function
* Automatically adjusts the following process
control factors.
1. ID sensor
2. Drum potential sensor
3. Charge grid voltage (by changing V
4. LD power (by changing V
Before using this SP, auto process control
should be on (SP3-901)
After changing the drum, ID sensor, drum
potential sensor, LD unit, or toner density
sensor, this SP should be used.
When installing a new machine, the
following two process are done
automatically.
1. Developer initialization
2. Forced toner supply (sends toner to the
toner hopper)
Do not use this SP after replacing the
developer. Use SP2-801 (developer
initialization)
* Selects the interval for applying a strip of
toner across drum and transfer belt to
prevent the drum cleaning blade and belt
cleaning blade from peeling off.
* Selects the LD power for making the toner
strip on the drum and transfer belt to
prevent the drum cleaning blade and belt
cleaning blade from peeling off.
Factory use only
*
Factory use only
*
* Factory use only
Factory use only
*
* Factory use only
4-19
SERVICE PROGRAM MODE
Settings
Start
)
D
)
H
Start
0 ~ 50
1 /step
0 (not
applied)
0 ~ 15
1 /step
1
0 ~ 100
1g /step
3 g
0 ~ 100
1 g /step
3 g
0 ~ 5
1 /step
2 s
0 ~ 20
1 s/step
6 s
0 ~ 50
1 time/step
30 times