Ricoh SP5 Series Service Manual page 229

SERVICE PROGRAM MODE
Mode No.
(Class 1 , 2 & & & & 3)
5-802 Printer Free Run
5-803 Input Check
1 ~
14
5-804 Output Check
1 ~
97
5-807 Option Connection Check
1 ADF
2 Bank
3 LCT
4 Finisher
5-811 Machine Serial Number
5-812 Service Tel. No. Setting
1 Service
Telephone
Number at SC
Condition
2 Service Fax
Number for
Counter
Printing
5-816 CSS Function
Function
1
Setting
2 CE Call
Function
* Performs a free run. The scanner scans
once and the printer prints for the number of
copies requested.
To perform the free run, select "ON"
1) Select "ON".
2) Select "Exit".
3) Select "Copy Mode".
4) Make the required settings (such as the
number of copies.).
5) Press the Start key.
After finishing the free run, return this SP to
"OFF"
Displays the signals received from sensors
and switches.
See the "Input Check" section for details.
Turns on the electrical components
individually for test purposes.
See the "Output Check" section for details.
Checks the connectors to the optional
peripherals.
* Use to input the machine serial number.
(Normally done at the factory.)
This serial number will be printed on the
system parameter list.
Use the " • " key to input "A".
* Use this to input the telephone number of
the service representative (this is displayed
when a service call condition occurs.)
Press the " • " key to input a pause.
Press the "Clear modes" key to delete the
telephone number.
* Use this to input the fax number of the
service representative (this is printed on the
Counter Report – UP mode, System No.19)
Press the " • " key to input a pause.
Press the "Clear modes" key to delete the
telephone number.
* Japanese version only.
Do not change the values.
* Japanese version only.
Do not change the values.
4-36
June 30, 1998
Settings
OFF
ON
ON
OFF
0: Not
connected
1: Connected
Off
On
Off
On