Ricoh SP5 Series Service Manual page 162

COPIER (A229)
[A]
[G]
4. Open the front cover and remove the strips of tape [A].
5. Remove the blade release pin [B] together with the transfer belt lock plate [C]
(1 screw).
6. Pull out the fusing unit. Lower the lever [D], remove the oil supply unit [E], and
remove the front and rear clamps [F]. Reinstall the oil supply unit and push in
the fusing unit. Remove the strip of filament tape [G] from the fusing unit.
[B]
[E]
A229I520.WMF
[D]
3-6
June 30, 1998
[C]
[F]
A229I102.WMF