Safety Information - Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit Manual

Safety Information

Regulatory Compliance
The CY8CKIT-059 PSoC
hardware or software in a laboratory environment. The board is an open system design, which does
not include a shielded enclosure. This may cause interference to other electrical or electronic
devices in close proximity. In a domestic environment, this product may cause radio interference. In
such cases, you may be required to take adequate preventive measures. In addition, this board
should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
may affect its performance and cause interference with other apparatus in the immediate vicinity. If
such interference is detected, suitable mitigating measures should be taken.
The PSoC 5LP Prototyping Kit, as shipped from the factory, has been verified to meet with
requirements of CE as a Class A product.
CY8CKIT-059 PSoC® 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *G
®
5LP Prototyping Kit is intended for use as a development platform for
The PSoC 5LP Prototyping Kit contains electrostatic
discharge (ESD) sensitive devices. Electrostatic charges
readily accumulate on the human body and any equipment,
and can discharge without detection. Permanent damage
may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid
performance degradation or loss of functionality. Store
unused PSoC 5LP Prototyping Kit boards in the protective
shipping package.
End-of-Life/Product Recycling
This kit has an end-of life five years from the date of
manufacture mentioned on the back of the box. Contact your
nearest recycler for discarding the kit.
5