Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit Manual page 18

2. Open the desired project in PSoC Creator by selecting File > Open > Project/Workspace. This
provides the option to browse to and open a previously saved project. If you want to open one of
the code examples provided with the kit, follow the instructions in the
page 31.
3. Select the option Build > Build Project or press [Shift] [F6] to build the project as shown in
Figure 3-3.
Figure 3-3. Build a Code Example
4. If there are no errors during build, program the firmware into the kit by choosing Debug >
Program or press [Ctrl] [F5], as shown in
on the PSoC 5LP Prototyping Kit, and the kit is ready to use.
Figure 3-4. Programming Device From PSoC Creator
CY8CKIT-059 PSoC® 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *G
Figure 3-4. This programs the target PSoC 5LP device
Kit Operation
Code Examples chapter on
18