Ide Hdd Auto Detection - Advantech PPC-103 Manual

will be
prompted for the supervisor password every time you try to enter the
CMOS Setup utility. If "System" is selected and User Password is
enabled, you will be requested to enter the user password every time
you reboot the system. If "Setup" is selected under the Security
Option field and User Password is enabled, you will be prompted only
when you reboot the system.
4.12

IDE HDD Auto Detection

The IDE Hard Disk Drive Auto Detection feature automatically
configures your new hard disk. Use it for quick configuration of new
hard disk drives. This feature allows you to set the parameters of up to
four IDE HDDs. The option with "(Y)" is recommended by the
system BIOS. You may also key in your own parameters instead of
64 PPC-103 User's Manual
Figure 4-9: IDE HDD auto detection screen