Pcm-9573 And I/O Adapter Replacement; Figure 2-12: Installing/Removing The Pcm-9573 In The Ppc-103 - Advantech PPC-103 Manual

2.7

PCM-9573 and I/O Adapter Replacement

To replace or service the PCM-9573 (the all-in-one CPU board) and I/O
adapter, complete the following steps:
1. Power off the PPC-103.
2. Remove the rear protective cover.
3. Install the PCM-9573 in the panel and screw in the four screws (see
Figure 2-12).
4. When the PCM-9573 is mounted in the panel, plug and press the
adapter into the socket (see Figure 2-13).
5. Some screws on your left hand side connect the I/O adapter to the
PC, and also connect the adapter to the PCM-9573. Screw the
screws into the panel.

Figure 2-12: Installing/removing the PCM-9573 in the PPC-103

3 2 PPC-103 User's Manual