Installing Software To The Hdd; Method 1: Use The Ethernet; Method 2: Use An Fdd; Method 3: Use The Com Or Parallel Port - Advantech PPC-103 Manual

2.5

Installing Software to the HDD

Installing software requires an installed HDD. Software can be
loaded in the PPC-103 using any of four methods:

2.5.1 Method 1: Use the Ethernet

You can use the Ethernet port to download software to the
HDD.

2.5.2 Method 2: Use an FDD

The FDD port is located on the rear panel. Unscrew the two
screws and detach the metal plate. Attach a communication
cable and a power cable to the FDD port, then attach them to
an FDD. Insert a disk containing the software and consult your
software manual for installation procedures.

2.5.3 Method 3: Use the COM or parallel port

You can use Lap Link 6 or similar transmission software.
Connect another PC to the PPC-103 with an appropriate
cable and transmit the software to the PPC-103.

2.5.4 Method 4: Use a 3.5" HDD or CD-ROM

Please refer to Section 2.4.1 "Installing one secondary HDD/
CD-ROM device (external)".
3 0 PPC-103 User's Manual