Power Management Setup; Figure 4-5: Power Management Setup Screen - Advantech PPC-103 Manual

The options are: Disabled (Default), Enabled.
4.6

Power Management Setup

Figure 4-5: Power management setup screen

Power Management
When enabled, allows you to use Power Management features.
The options are: Disabled (Default), Enabled.
PM Control by APM
The option "No" allows the BIOS to ignore the APM (Advanced
Power Management) specification. Selecting "Yes" will allow the
BIOS to wait for APM's prompt before it enters Doze mode, Standby
mode, or Suspend mode. If the APM is installed, it will prompt the
BIOS to set the system into power saving mode after all tasks are
done.
The options are: Yes (Default), No.
Video Off Option
This feature provides the selections for the video display power saving
mode. The option "Susp, Stby--Off" allows the video display to go
Chapter 4 Award BIOS Setup 57