9.12 IDE HDD Auto Detection
Figure 9-9: IDE HDD auto detection screen
The IDE Hard Disk Drive Auto Detection feature automatically
configures your new hard disk. Use it for quick configuration of new
hard disk drives. This feature allows you to set the parameters of up to
four IDE HDDs. The option with "(Y)" is recommended by the
system BIOS. You may also key in your own parameters instead of
setting them
according to the system BIOS. After keying in all settings, press "Esc"
to return to the main menu. For confirmation, enter the Standard
CMOS Setup feature.
Chapter 9 Award BIOS Setup
99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com