Maintenance And Service; Maintenance; Technical Support - Siemens SITRANS F Series Operating Instructions Manual

Maintenance and Service

9.1

Maintenance

Hazardous Voltage. May cause death or serious personal injury. Disconnect power before
working on this product.
The device is maintenance-free, however, a periodic inspection according pertinent
directives and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
9.2

Technical support

CAUTION
Repair and service must be carried out by approved Siemens personnel only.
Note
Siemens Flow Instruments defines sensors as non-repairable products.
Technical Support
If you have any technical questions about the device described in these Operating
Instructions and do not find the right answers, you can contact Technical Support:
● Via the Internet using the Support Request:
● Phone: +49 (0) 911 895 7222 / 1 800 333-7421
Further information (Page 8) about our technical support is available in the Internet at
Technical support (http://support.automation.siemens.com/WW/view/en/16604318)
FST020 IP65 NEMA 4X
Operating Instructions, 02/2012, A5E03086487-05
WARNING
Service and support (http://www.siemens.com/automation/service&support)
9
101