Siemens SITRANS F Series Operating Instructions Manual page 118

Troubleshooting
10.4 Site Setup Data
4. The current measured correction value is displayed.
5. Press <ENTER> again to install this correction value that will now appear in the [HF]
Note
The value shown in the [Automatic] display line can not be changed and is for user
information only.
6. If you decide not to use the [Automatic] selection, press any key other than <ENTER> to
116
menu cell.
abort the operation.
FST020 IP65 NEMA 4X
Operating Instructions, 02/2012, A5E03086487-05