Figure 5-21 Direct Mount 180° Opposed With Mounting Tracks - Siemens SITRANS F Series Operating Instructions Manual

Connecting
5.4 Installing the Sensor
The Direct Mount configuration uses a set of two track rail assemblies; one for each sensor,
installed 180° apart on the pipe. The set includes:
● Reflect Mode Track Assembly - This track rail includes the Tension Screw and REF hole
● Direct Mode Track Assembly - This track rail has number index holes for inserting an
Note
A pin will be inserted into the hole designated by the Number Index on the Direct Mode
track rail to position one of the sensors (see
50
to position one sensor.
index pin to position the other sensor.
①
To SITRANS F Transmitter
②
1012CNF Series Cable
③
Mounting Strap Guide
④
Sensor Clamp
⑤
1011NPS Series Sensor Upstream
⑥
1012TN Series Mounting Track
Figure 5-21 Direct Mount 180° opposed with Mounting Tracks
⑩
in figure below).
⑦
1011NPS Series Sensor Downstream
⑧
Flow direction
⑨
1012TN Series Mounting Track
⑩
REF Hole Index Pin
⑪
Ultrasonic Couplant
⑫
Pipe
Operating Instructions, 02/2012, A5E03086487-05
FST020 IP65 NEMA 4X