Muratec MFX-1500 Operating Instructions Manual page 20

3. Unpack a new toner cartridge from its
carton. Then, holding the toner cartridge
with both hands, slowly shake it as
shown (note the arrows).
CAUTION : Do not throw the toner cartridge into the fire; this will
!
avoid any possibility of ignition and/or injury.
4.
Place the new toner cartridge on a flat, clean surface.
5.
Unpack the drum cartridge from its carton.
Important: Shield the drum cartridge from light, especially strong light.
Later, if you have to remove the cartridge from the fax,
immediately wrap it in a thick cloth to protect it from light.
6.
Set the drum cartridge on the toner cartridge, making sure that the drum
cartridge's two pins fit in the slits inside the toner cartridge frame.
Developing roller
Note: Do not touch the developing roller.
7.
Grip toner cartridge as shown, to avoid
pinching your fingers between the toner
cartridge and the printer frame. Keep the
drum slot free of dust and other foreign
materials.
8.
Gently install the toner
cartridge in the printer,
making sure the toner
cartridge's four pins fit in
the slits inside the printer
frame.
9. Insert the fuser cleaner into the
slot in the fuser unit. Fuser cleaner
cleans the fuser unit roller. You
should replace the fuser cleaner
every time you change the new
toner cartridge.
10. Close the printer cover.
11. Close the top cover. Be sure to push on a portion of the cover to lock it into its
original (closed) position.
Note: The fax machine will not work if the cover isn't closed properly.
Getting started
Keep the drum slot
free of dust and
other foreign materials.
Do not touch the
drum surface on
the cartridge's bottom.
1.11