Muratec MFX-1500 Operating Instructions Manual page 61

Fax dialling via speed-dial
To dial a fax call using a speed-dial number:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
Insert the document.
2.
Adjust resolution and contrast if necessary.
3.
4. Toggle between transmission from the feeder or from memory if necessary, by
pressing .
MEMORY TRANSMIT
Note: This toggle affects only a transmission from the
from the is always memory transmission.
FBS
5. Press / . The display will show:
SPEED DIAL TEL INDEX
Enter Speed-Dial No.
S_
Use the numeric keypad to enter the three-digit identifier (such as 018, in this
6.
example) for the speed-dial number you want to dial. The display will show:
Press Start
S018_
Press .
7.
START
The machine will handle the call from here. The sequence will vary depending upon whether
you specified transmission from memory or transmission from the feeder.
If you specified memory transmission (
• Your fax scans your document into memory first, then dials the other fax.
• The display shows the Location
ID
settings:
Shipping & Receiving
A4 Normal
Note: If the speed-dial number doesn't have a Location
• When the other machine answers, your fax will transmit the document directory
from memory. (To review memory transmission, see page 1.23.)
/ to change to Fax mode.
FAX
. Transmission
ADF
or ):
ADF FBS
and the document's width and resolution
, the number appears.
ID
If you specified non-memory transmission (
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its
scanner, transmitting as it goes.
• The display shows the Location
and the document width and resolution settings:
ID
Shipping & Receiving
A4 Normal
Note: If the speed-dial number doesn't have a Location
Phoning via speed-dial
To dial a phone call using a speed-dial number, you must have an optional handset
attached to your machine.
Here's how to make the call:
Obtain a dial tone by doing one of the following:
1.
• Lifting the handset
• Press
to use the monitor speaker.
/
MONITOR CALL
Press . The display will show:
2. /
SPEED DIAL TEL INDEX
** Tel Mode **
S_
Use the numeric keypad to enter the three-digit identifier (such as 018, in this
3.
example) for the speed-dial number you want to dial. The display will show:
Press Start
9-555-5783_
Note: Remember that your fax machine's monitor speaker is not a speakerphone; so,
if you dialed by using the monitor speaker, be sure to pick up the handset and
speak to the other person when he/she answers!
Note: You also can use this method to dial a fax call when, for some reason, you
want to hear the other fax's answering fax tones. (Make sure there's a
document in the feeder.) When you do hear those tones over either your
handset or the monitor speaker, press
feeder; if you're using your handset, hang it up at this point.
Beyond the basics
only):
ADF
, the number appears.
ID
to send the document in the
START
2.13