Continuous Polling - Muratec MFX-1500 Operating Instructions Manual

5. Enter the remote fax machine's number by either pressing a one-touch key,
entering a speed-dial number or just dialling the number normally through the
numeric keypad.
To perform the database polling now, skip to step 9.
To perform delayed database polling, proceed to step 6.
6.
Press
COMMUNICATION OPTIONS
Delayed
Enter Time: 15/17:05
7.
Use the numeric keypad to enter the date and time when your machine should
perform the delayed database polling.
8.
Press .
ENTER
9. Press .
START
Your machine will dial the number and, upon making contact with the other machine,
begin receiving the file(s) as if the other machine had placed the call.

Continuous polling

To perform continuous polling from one or more remote fax machines:
1. Make sure that the polling document is actually set in the remote machine.
2.
Press communication options six times and then press enter.
The display will show the current time:
Cont Polling
Start Time: 18:30
3. Use the numeric keypad to enter the time when your machine should begin the
continuous polling. Here, we've set it for 7:00
Cont Polling
Start Time: 07:00
Note: To move the cursor to a specific digit, press
leftward, or to move it rightward, to that digit.
4.
When the start time is as you wish, press
show:
Cont Polling
End Time: 07:00
, . The display will show:
ENTER
.
AM
to move the cursor
to save it. The display will
ENTER
5. Use the numeric keypad to enter the time when your machine should finish the
continuous polling. Here, we've set it for 3:00
Cont Polling
End Time: 15:00
Note: If you set an end time earlier than the start time you entered in step 3,
the continuous polling will end at the selected end time tomorrow.
Note: To move the cursor to a specific digit, press
leftward, or to move it rightward, to that digit.
6. When the end time is as you want, press
will show:
Enter Fax Number
_
7. Enter the remote fax machine's number by either pressing one-touch key,
entering a speed-dial number or just dialling the number normally through the
numeric keypad.
If you are entering only one number for continuous polling, skip to step 9.
To add any additional fax number(s) for this operation, proceed to step 8.
8.
To add each successive fax number, press
insert a comma, then enter the number as in step 7. You can specify up to 10
numbers (and/or call groups) for continuous polling.
Press Start
[01],9-5551204,S118
Important: Do not insert a comma after the last fax number.
Note: If you enter characters by mistake, just press
before proceeding.
9. Press .
START
When it performs the polling command, your machine will dial each number and,
upon making contact with the other machine, begin receiving the document as if the
other machine had placed the call. Every day, it will continue the process throughout
the time period you have selected in steps 3–5.
Note: When you wish to end this operation, use
command (see pages 2.21–2.22).
Beyond the basics
.
PM
to move the cursor
to save it. The display
ENTER
between each one to
BROADCAST
to clear them
CANCEL
to delete this
REVIEW COMMANDS
2.31