Muratec MFX-1500 Operating Instructions Manual page 27

Getting started
Adjust the monitor speaker's volume
You can set the volume of the monitor speaker, assuring that on-hook dialling will be
as loud (or as soft) as you require.
1. /
Press on the control panel. You now should hear a dial tone,
MONITOR CALL
and the display will show:
** Tel Mode **
Important: If you don't hear a dial tone, make sure your fax machine is
plugged into a working phone line.
2.
If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3.
Adjust the volume as you wish:
To turn the volume up, press
To turn the volume down, press
The indicates the volume. Here are the possible settings:
LCD
** Tel Mode **
= Volume off.
Volume:
** Tel Mode **
= Low setting.
Volume:
** Tel Mode **
= Medium setting.
Volume:
** Tel Mode **
= Loudest setting.
Volume:
4.
Press / again to hang up.
MONITOR CALL
1.18
.
.