D.power Requirement; Preparation For Power Supply; Power Requirements; Power Cable - Keysight Technologies E5061B Service Manual

Keysight E5061B
Network Analyzer
Service Guide
D Power Requirement

Preparation for Power Supply

Before turning on power to the equipment, be sure to verify the following:

Power Requirements

The E5061B requires the following power source:
Voltage
Frequency
Maximum power consumption

Power Cable

In accordance with international safety standards, this instrument is equipped
with a three-wire power cable. When connected to an appropriate ac power
outlet, this cable grounds the instrument frame. The type of power cable
shipped with each instrument depends on country of destination. For power
cable options, refer to http://www.keysight.com/find/powercords.
For protection from electrical shock, the power cable ground must not be
defeated.
The power plug must be plugged into an outlet that provides a protective
earth ground connection.
Requirements
100 -240 VAC ± 10% (Vpeak ≧ 120 V)
47 to 63 Hz
300 VA
117